You notice there is something sticky on your iron. What could it possibly be? A sticky iron is a problem, especially when you are trying to iron your clothes. Plus, you may end up spreading the sticky substance on the clothes themselves. Let’s find ut how to remove sticky residue from an iron.
To prevent further disaster from happening, you’ll want to follow this quick guide. We’ll show you how to remove this sticky residue properly. We’ll also explain what the residue is and what may be the cause of it. With that said, let’s get started.
What is the Residue on Your Iron?
Over time, residue can get built up on the soleplate of an iron. It may originate from a numerous amount of substances including starches, adhesives, even burnt or melted fabric.
That’s why it is important for you to clean the residue off safely and as soon as possible. Because if it cools off, that’s when removing it can be a major challenge.
How to Remove Sticky Residue from Your Iron
What you are going to need is water and baking soda. That’s it! No special cleaning products or anything else.
Now, here are the following steps that you need to follow:
- Mix the baking soda with warm water. The mixture needs to be slurry.
- Apply the mixture on the soleplate using a wooden spoon or even a small spatula.
- Wipe the mixture using a clean cloth. Reapply the mixture again and wipe it down until the soleplate is free of any sticky residue. You may want to repeat the process a couple of times if necessary.
- Find a cotton swab and dip it into the mixture. Here, you’ll want to wipe the small vent holes. Then, use a separate swab and dip it in distilled water. Here, you’ll be using it to remove the mixture.
- If there is any water in the tank, pour it out. Replace it with fresh distilled water. Then power on the iron and set it to the highest heat setting. Press the steam button to ensure that the remaining amount of the mixture is removed. After this, shut off the iron and empty the water tank.
This is one of the common methods to follow if you are removing any sticky residue from your soleplate. Be sure to do this on a regular basis before or after using your iron.
Cleaning an iron free of any sticky residue can be a simple task. However, failure to do so can lead to poor performance. Not to mention, you risk ruining your clothing.
Don’t spread the sticky stuff all over your clothes. That’s why proper maintenance is important whenever you are using an iron. Plus, you can extend the longevity of your iron just by performing regular maintenance as often as possible.
We hope this guide has been helpful to you in regards to cleaning your iron.